AW-FET-060C-065
AW-FET-060C-065
Unmanaged 4xFE PoE + 2xFE UTP Switch
|
|||||||
|
|
|
Overview
The AW-FET-060C-065 quipped with DIP switch provides EX mode. Especially designed for IP Surveillance application, the camera provides standard 802.3af/at PoE functions in EX mode, while EX mode transmits data & power on one single cable up to 250m via EX ports for long-reach PoE IP cameras. The Commercial series adds an extra 20% range of input voltage tolerance (280VAC 4hrs, 300VAC 1 min), lightning surge protection of AC power & PoE surge protection to prevent the damage caused by unstable outside AC power, lightning surges, and power spikes. These unique features reduce costs associated with the replacement of damaged units.
Key Features
ST Mode
Any Port @ ST Mode support 802.3af/at PoE Camera for 100M @ 100Mbps
EX Mode
EX Port @ EX Mode support 802.3af/at PoE Camera for 250M @ 10Mbps
*EX Mode: Cat.6 or better UTP/STP cable is highly recommended. Low qulity cables will seriously limit the cabling distance.
NDAA Compliance
Model | |
Short Highlight | |
Networking Specifications | |
10/100Mbps RJ45 PoE Port | |
10/100Mbps RJ45 Port | |
10/100/1000Mbps RJ45 Port | - |
Gigabit SFP Slot | - |
Gigabit RJ45/SFP Combo Ports | - |
EX Mode PoE Ports (250M@10Mbps) | |
VLAN Mode | - |
Ethernet Performance | |
Switching Capacity | |
Mac Table | |
Jumbo Frame | |
Auto-MDI/MDI-X, Auto-Negotiation | |
Power Specifications | |
Power Input Voltage | |
Max. PoE Output Power | |
Total PoE Power Budget | |
IEEE 802.3af/at | |
Power Pin Assignment | |
PoE PD Auto Detection | |
Surge Protection/Each PoE Port | |
Surge Protection for AC Power | |
General | |
Operating Temperature | |
Storage Temperature | |
Operating Humidity | |
Dimensions | |
Weight | |
Certifications | |
EMC | |
Safety |